ILFORD Simplicity Film Starter Pack

ILFORD Simplicity Film Starter Pack (1178847)

• Diese in praktischen Beuteln konfektionierten Chemikalien sind für die einfache, Benutzer-Filmverarbeitung auf einer Reise oder einen idealen Einstieg in Schwarz-Weiss-Filmentwicklung gedacht.
• Jeder Simplicity-Beutel enthält die erforderliche Menge an Fotochemikalien, um 2 x 35 mm (135) -Filme oder 1 x 120-Film in einem 600-ml-Entwicklungstank zu verarbeiten. Diese werden als Teil des Standardentwicklungs-, Stopp-, Fixier- und Waschprozesses verwendet. Mischen Sie einfach den gesamten Inhalt* eines Beutels mit Wasser bei der richtigen Temperatur, um 600 ml Flüssigkeit herzustellen, und verwenden Sie diese dann im Entwicklungstank.
• .enthält:
• 1 x Filmentwickler
• 1 x Stoppbad
• 1 x Fixiermittel
• 1 x Netzmittel
• * Bitte beachten Sie, dass der Beutel für das Netzmittel bis zu 8-mal verwendet werden kann, um 16 x 35 mm oder 8 x 120 Filme zu entwickeln, wenn Sie ihn in einem 600 ml-Tank verwenden.

ILFORD Simplicity (1178847) Kit de démarrage

1 sachet de dévéloppeur film

1 sachet de bain d'arrêt

1 sachet de fixateur film

1 sachet d'agent mouillant

Chimie en sachet pour usage unique simplifiant l'usage des chimies photo

A partir des chimies ILFORD existantes

Conçu pour une plus grande facilité d'utilisation

Prêt à diluer pour développer :

2 films 135mm ou 1 film 120mm

Suffisant pour une cuve de 600ml par exemple

ILFORD Simplicity Film Starter Pack

ILFORD SIMPLICITY Starter Pack of photo chemical sachets for convenient, single-use film processing. Develops 2 x 35mm (135) film or 1 roll of 120 film in a 2-reel developing tank.

• Contains: film developer, stop bath, fixer and wetting agent
• Convenient, single-use sachets
• Develops 2 x 35mm or 1 x 120 film
• Designed for use in 2-reel, 600ml developing tanksThe Ilford Simplicity Black & White Starter Pack contains photo chemical sachets for convenient, single-use film processing. It allows you to develop two black-and-white 35mm films or one 120 film. The Simplicity Starter Pack contains the necessary chemistry for developing black-and-white film and consists of pre-measured portions of four concentrated chemicals to produce working solutions for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600ml developing tank. The Simplicity Film Wetting Agent sachet can be used up to 8 times to develop 16 x 35mm or 8 x 120 films when used with a 600ml tank.
• Simplicity Film Developer
• The film developer sachet contains 60ml of Ilfosol 3 concentrate, which is then mixed with 540ml of water (1+9 dilution) at temperature to create a 600ml working solution for developing one roll of 120 or two rolls of 35mm film in a two-reel, 600ml developing tank.
• Ilfosol 3 is characterized by its ability to produce fine grain results with high sharpness and full film speed, and it is particularly well-suited for use with medium-speed films.
• Simplicity Film Fixer - Ilford Rapid Fixer
• The fixer sachet contains 100ml of Rapid Fixer concentrate, which is then mixed with 500ml of water (1+5 dilution) at temperature to create a 600mL working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
• Rapid Fixer is a rapid-acting, non-hardening fixer that should not be used with any hardeners.
• Simplicity Stop Bath
• The stop bath sachet contains 30ml of Ilfostop concentrate, which is then mixed with 570ml of water (1+19 dilution) at temperature to create a 600ml working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600ml developing tank.
• Ilfostop is a low odor, citric acid-based stop bath that stops the development process and helps to prolong the life and activity of the fixer solution. It is recommended to ensure accurate development times.
• Simplicity Wetting Agent f Ilfotol, of which two cap-fulls are required per use during the final rinse. This sachet contains enough wetting agent for eight rolls of 120 or 16 rolls of 35mm film in a two-reel, 600ml developing tank.
• Ilfotol is a non-ionic wetting agent that aids in rapid, even drying of film, helps to prevent water spots from forming, and promotes anti-static qualities.

ILFORD Simplicity Film Pack

Confezionati in comode buste, questi prodotti chimici sono progettati per una facile lavorazione della pellicola da parte dell'utente durante un viaggio o per un'introduzione ideale alla lavorazione della pellicola in bianco e nero.

Ogni sacchetto Simplicity contiene la quantità di prodotti chimici fotografici necessaria per trattare 2 pellicole da 35 mm (135) o 1 pellicola da 120 in un serbatoio di lavorazione da 600 ml. Questi sono utilizzati come parte del processo standard di sviluppo, arresto, fissaggio e lavaggio. Basta mescolare l'intero contenuto* di un sacchetto con acqua alla giusta temperatura per produrre 600 ml di liquido, quindi utilizzarlo nel serbatoio di sviluppo.

.contiene:

1 x sviluppatore di pellicole

1 x bagno di arresto

1 x fixer

1 x agente bagnante