Neues Demomodell
Exposure XM HP Headphone Preamp schwarz
Volle Exposure Garantie
VP CHF 1'890.00
Features
• Custom-made toroidal power transformer
• High quality all aluminium casework and
extruded front panel
• High quality resistors & capacitors used in the
signal path
• All discrete audio output stage with high drive
capability for low impedance headphones
• 2 pairs of 6.35mm jacks and 2 pairs of XLR
sockets, allowing 2 pairs of headphones to be
used at one time
• Moving magnet phono and two line level inputs
• Two coax (bnc) and two optical inputs and one
class 2 USB input with DSD
• Separate pre-amp output
• Remote control
• Three year guarantee
Headphone Output
Output Impedance :
Maximum Level into 33 Ohms Load :
Total Harmonic Distortion :
Maximum Level into 330 Ohms :
Total Harmonic Distortion :
Load Impedance Total All Outputs :
Analogue Inputs
AUX/PH Input MM :
Frequency Response :
AUX 2 & AUX 3 Input Line :
Total Harmonic Distortion :
Frequency Response :
Signal to Noise Ratio :
Channel Separation @ 20kHz :
Digital Inputs
SPDIF Inputs BNC Coax & Optical :
Total Harmonic Distortion :
Signal to Noise Ratio :
USB Input :
General
Mains Supply :
Fuse :
Power Consumption :
Dimensions (HxWxD) :
Net Weight :
Gross Weight :
<5 Ohms
@ 1kHz & 0.01% THD : 7V RMS (1.5W)
@ 2V output, 1kHz : <0.003% (120mW)
@ 1kHz & 0.01% THD : 7.5V RMS (170mW)
@ 2V output, 1kHz : <0.003% (12mW)
16 Ohms minimum
2.5mV @ 1kHz, 47K Ohms S/N > 73dB
+/-0.5dB 50Hz-20kHz. High pass roll off
-1.5dB @ 20Hz
350mV @ 1kHz > 14K Ohms output gain
x3.75, +11.5dB
<0.005% at 1kHz : @ 1.3V RMS output
20Hz - 20kHz +/- 0.5dB
ref 1.3V RMS Output : 1kHz >92dB
>60dB
32 - 192kHz @ 16-24 bits
<0.005% at 1kHz @ 1.3V RMS output
ref 1.3V RMS Output : 1kHz : >98dB
Linear PCM 44K1 - 192kHz @ 16-24 bits DSD
x64 (DoP) Asynchronous transfer from host
110/120V or 220/240V @ 50/60Hz (factory
set)
T2AL for 110/120V units
T1AL for 220/240V units
<15W
89mm x 218mm x 363mm
4kg
5kg
)
)
)
){kind=icon}
-dac-amp)
)
