Mode de paiement
Virement bancaire / Poste
ÉtatNeuf avec emballage d'origine

Studio Projects CS1000 Recording Bundle

4 juin 2018 à 03:57
Encore 2 sur 2 en stock
Prix200.00
Achat direct

LivraisonRecommandé, CHF 14.00
Vendeur
Vitamine
PRO
98.3%
Mode de paiement
Virement bancaire / Poste
ÉtatNeuf avec emballage d'origine

Description

Studio Projects CS1000 Recording Bundle

Recording Bundle with CS1 Mic, Cable, Windscreen and Shock M

Matériel neuf dans le carton d'origine, jamais déballé, vendu cause de sur-stock

Overview
The CS1000 Recording Bundle includes most everything you need to start your next recording session. Included in the bundle is a CS1 mic, an XLR cable, a windscreen, a shock mount, a handy pouch, and the CS1 manual.

The Studio Projects CS1 is an externally polarized cardioid pressure gradient transducer microphones with FET impedance converter. The capsule is a 1.06" (27mm) capsule, with a diaphragm thinkness of 6m. It features four selectable pads, four high pass filters, and four low pass filters for added control in various recording applications and a clear, full response expected from a large capsule microphone design.

Versatility is key in the recording arena, and the Studio Projects CS1 is well equiped to handle any recording application. It is designed to deliver the finest quality vocal and instrumental recordings and will serve to enhance any professional or project studio.

As a result of uncompromising dedication and advanced production capabilities, Studio Projects will continue to broaden the range of quality pro audio microphones & electronics for today's recording environment.

Specifications

TYPE: Pressure gradient transducer microphone
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20~20000Hz
SENSITIVITY: 14mV/Pa=-32dB(0dB=1V/Pa).
OUTPUT IMPEDANCE: <200 Ohm
LOAD IMPEDANCE: >1000 Ohm
MAXIMUM SPL: 134 dB SPL for 1% THD @1000Hz (0dB SPL=0.00002Pa).
NOISE: 10 dB-A (A-weighted per IEC268-15)
S/N: 84 dB-A
PADS: -5dB, -10dB, -15dB, and -20dB selectable
LOW CUT: 15kHz, 7kHz, 5kHz, and 3kHz 6dB/Octave
HIGH CUT: 50hZ, 75hZ, 150Hz, and 300hZ 6dB/Octave
Power requirement 48 +/- 4V
CURRENT CONSUMPTION: <4mA
CONNECTOR: Gold-plated 3-pin XLR
CIRCUIT: JFET driven, discrete balanced output

Applications

Close miking of instruments with high sound pressure levels
Announcer's mic for broadcasting/dubbing
Home recording and project studios
Vocalist recording
Spot mic for: wind instruments, strings, percussion and guitar amps
XY - Coincident Cardioids
Mid-Side Method
Stereosonic Technique (Blumlein)
Overheads

Partager l'offre

Categories