Lumintop FW3A, CW-Edition, 6500k
Benötigt 18650 ungeschützt mit mind. 10A (Akku nicht dabei, bitte separat bestellen, siehe meine anderen Auktionen)
Lumintop FW3A is Smart 18650 flashlight Anduril firmware triple LED CREE XPL HI LED with tail switch; 2800 lumens 200 Meters max extremes flashlight
FW3A was designed by Fritz15 and the flashlight forums TLF & BLF. Brought to life by Lumintop. Is a small 18650 triple LED lamp with tail switch and a great, easy user interface
The Cold white color temperature is 6500k.
A small 18650 triple LED lamp with tail switch and a great, easy user interface.
Emitter:Three LEDs on a copper DTP MCPCB e.g.
Cree XP-L Hi or Samsung LH351D Optic:Standard TIR Carclo 10511 (matte) Lens:Glass with anti-reflective coating Flux:~2800 lm (XP-L Hi)
Intensity: ~10 000 cd ANSI throw ~200 m (XP-L Hi)
Firmware: The FW3A uses free software called Andúril, distributed under the terms of the GPL v3.
User interfaces:  By default the FW3A is set to use SMOOTH RAMPING. Instant access to TURBO mode is also provided.
A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.
MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets.
To exit this mode, physically disconnect power
MUGGLE mode uses a reduced output.
It has an electronic LOCKOUT for safety, but acts also as momentary low light.
Other functions: Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm
Battery: One flat-top or button-top 18650 cell. An unprotected cell is recommended. Max. length 66 mm. Cell is not included.
Driver:FET+7+1 driver. Low parasitic drain while
Body:Aluminum with hard-coat anodizing
Switch:Electronic tail switch
Ingress rating:Equivalent to IPX7 Weight:Approximately 53 g without cells Size:25.5 mm Ø head x 92.5 mm length.