Zahlung
Barzahlung
ZustandGebraucht

dbx 2231 2x 31-Band Grafic Equalizer

16. Sep. 2019, 20:08
Mindestgebot300.00
Dein nächstes Gebot

Kaufpreis420.00
Sofort Kaufen

Verkäufer
Zahlung
Barzahlung
ZustandGebraucht

Beschreibung

dbx 2231 2x 31-Band Grafic Equalizer

Grafischer 31-Band Stereo-Equalizer

dbx 2231 Grafic Equalizer

  • 2x 31-Band
  • 3HE
  • sehr guter Zustand, selten genutzt (letztmalig vor ca. 5 Jahren gebraucht)
  • Sie bieiten auf 1 Exemplar 


Hersteller-Spezifikationen:

  • Input Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
  • Input Type: Electronically balanced/unbalanced, RF filtered
  • Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm
  • Max Input: >+21dBu balanced or unbalanced
  • CMRR: >40dB, typically >55dB at 1kHz
  • Output Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
  • Output Type: Impedance-balanced/unbalanced, RF filtered
  • Output Impedance: Balanced 200 ohm, unbalanced 100 ohm
  • Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
  • Bandwidth: 20Hz to 20kHz, +/-0.5dB
  • Frequency Response: <10Hz to >50kHz, +0.5/-3dB
  • Signal-to-Noise (NR In: +/-6 and +/-15dB ranges): >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
  • Dynamic Range (NR In: +/-6dB and +/-15dB ranges): >120dB, unweighted
  • Signal-to-Noise (NR Out: +/-6dB range): >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
  • Dynamic Range (NR Out: +/-6dB range): >112dB, unweighted
  • Signal-to-Noise (NR Out: +/-15dB range): >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
  • Dynamic Range (NR Out: +/-15dB range): >108dB, unweighted
  • THD+Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
  • Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
  • Noise Reduction: Up to 20dB of dynamic broadband noise reduction
  • NR Switch: Activates dbx Type III Noise Reduction
  • Bypass Switch: Bypasses the graphic equalizer section in the signal path
  • Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
  • Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
  • I/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
  • Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
  • Indicators: NR Active (Yellow); EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
  • Operating Voltage: 230VAC 50/60Hz
  • Power Consumption: 28W
  • Power ConnectorIEC: receptacle
  • Dimensions: 5.25" H X 19" W X 7.9" D (13.335cm x 48.3cm x 20.1cm)

Angebot teilen

Gehe zu